Pages Navigation Menu

Noisy Brakes Are Telling You Something

Noisy Brakes Are Telling You Something

Noisy brakes are more than just an irritation, they are often the first indication that you get that they are in need of attention or, depending on the outcome of the investigation, repair. Some of the loud noises that you hear periodically from your brakes are benign; they may mean little more than dust on the brake pads. Other times it pays dividends to have the condition checked as it may be that a particular component is malfunctioning or something needs to be replaced. If the brakes on your car are noisy and the noise is accompanied by a problem such as the car pulling to one side or the other then brake repair in Mokena is usually in order.

Two common reasons for brakes to be noisy are dust from the road as well as the material that is used to manufacture the brake pads. Dust forms on the surface of the brake pads and rotors and the brakes will often squeal until the dust is worn off. Modern brake pad material includes metallic substances, although this adds considerably to the life of the brakes it does has a tendency to make them noisier.

If you are aware of noise coming from the brakes on your vehicle, pay particular attention; if the noise does not stop on its own you should have them inspected for problems. Although dust is a problem, a bigger problem is worn out brake pads. Modern brake pads are made with an indicator imbedded, when the pad wears down to the point where the indicator is exposed the brakes will let out a whistling noise, this is your indication that brake repair in Mokena is needed. While the mechanic is replacing the worn pads he will also thoroughly inspect the mechanism, looking for any hardware which has been lost of loosened. Brake components should not move other than when the brakes are applied.

If you fail to replace the brake pads once you have been made aware of a problem you stand to damage the more expensive brake rotor or on some cars, the brake drum. Worn brake pads will create excessive heat, this heat can easily warp the rotor or score the surface of the rotor or drum. When this happens the rotors will have to be repaired by truing them on a lathe or perhaps they will be damaged to the point where they need replacing.

Never put off brake repair in Mokena. Brakes rarely just fail; the problems start small and at this stage are easy to repair.

For more information visit the site VIPTire.com.

Leave a Comment

Your email address will not be published. Required fields are marked *

two × 3 =

Pin It on Pinterest

Shares
Share This